• 877.677.4327
  • |
  • Customer Service

Pvc

View: Grid | List
Showing 1 - 12 of 150
Filter
Products (150)
AIRE PVC Kayak Material - Item #38015.01

Replacement 1100-denier/24 oz. AIRE PVC Kayak Material. Use Stabond™ to adhere to other PVC material. Sold by the running foot in a 70" wide roll.

  (4)

$18.00

AIRE PVC Raft Floor Material - Item #38016.01

AIRE 43oz. PVC material used for the underside of raft tubes and the floor. Use Clifton Urethane Adhesive or Stabond™ to adhere to other PVC material. Sold by the running foot in a 70" wide roll.

  (5)

$27.00

NRS PVC Fabric - 1000d 6" x 18" - Item #84026.01

This 1000-denier/37-ounce NRS PVC Material is used in the GigBob and Clearwater Drifter inflatables. It measures 6" x 18".

  (2)

$8.95

Extra 9" or 12" Oar Pin - Item #77421.01

Extra Pin for the Pin and Clip Setup. 9" Pin Assembly comes with rubber bumper on top, one 3 1/2" PVC bushing, two washers and a nut. 12" Pin Assembly comes with rubber bumper on top, one each 1", 2" and 3 1/2" PVC bushings, three washers and a nut.

  (2)

$10.95 - $11.95

NRS MaverIK Kayak Foot Braces - Item #37318.01

…braces to your Pennel Orca® IK for added stability and balance. * Comes with 4 Pennel Orca® patches for installation. * Can be glued to PVC and urethane inflatables with Stabond Adhesive, Item # 38704.01. * See "Installing Performance Pack" in the More Information section for step-by-step…

  (5)

$38.95

Clifton Urethane Adhesive - Item #38700.01

Clifton Urethane Adhesive Excellent one-part contact adhesive for PVC and urethane. The 4 oz. size comes with brush applicator built into the lid. Coverage Guidelines: 4 ounces should cover 1 - 1.5sq. ft. of patch (both surfaces), with 2 thin coats. Shelf life: 1 year

  (31)

$24.95 - $59.95

NRS Pennel Orca Doughnut Patch for Leafield Valve - Item #38525.01

…Use Clifton Hypalon Adhesive and Clifton Hypalon Accelerator for gluing to Pennel Orca and other hypalon boat materials. Patch can also be glued to PVC- and urethane-coated boat materials, using Stabond Adhesive. You may need to enlarge the hole for some valves. See the "How to Replace a Raft Valve"…

  (3)

$3.50

Railblaza RibPort Mount with 3M Self-Adhesive Pad - Item #84151.01

…the keystone to using any Railblaza mount accessory, but doesn't require any mounting hardware. * The RibPort Base Mounts are perfect for Hypalon, PVC and polyethylene inflatable craft, with no drilling or hardware required. * Messy glues are not necessary either. Easily apply the 5 x 3.5 inch base…

$31.99

NRS Outlaw Raft PVC Material - 2000d 6" x 18" - Item #84029.01

Repair material for NRS Outlaw Rafts. This tough PVC-coated material can also be used for repairs on other PVC rafts, catarafts, IKs and pontoon boats. 6" x 18" in size. * Use Clifton Urethane Adhesive, Stabond Adhesive or Vynabond Adhesive when making repairs. * Material is 48 oz./2000 denier.

  (1)

$8.95

PVC Sleeve for 9" or 12" Pin - Item #77424.01

PVC Sleeve replacements for 9" or 12" Pin.

$0.50 - $2.50

AIRE PVC Raft Material - Item #38014.01

Replacement 37 oz./1670 denier AIRE PVC Raft Material. Use Clifton Urethane Adhesive or Stabond™ to adhere to other PVC material. Sold by the running foot in a 70" wide roll.

  (2)

$27.00

NRS Canoe 2" D-Ring PVC Patch - Item #37302.01

This PVC patch with nickel-plated D-ring can be attached with Clifton Urethane Adhesive to dry bags, Royalex® canoes and other vinyl (PVC) surfaces. The patch diameter for these D-rings is 6 1/2".

  (2)

$10.95

View: Grid | List
Showing 1 - 12 of 150