• 877.677.4327
  • |
  • Customer Service

Pressure Valve

View: Grid | List
Showing 1 - 12 of 95
Products (95)
Leafield A6 Pressure Relief Valve - Item #38532.01

Holds pressure up to 2.5 PSI. This valve is intended to be used without the cap. The included fine-mesh screen will help keep debris out of the valve. If your valve should start leaking while boating, use the Pressure Relief Valve Cap (Item # 38534.01, sold separately) as a back up to keep the floor…



K-Pump Kwik Check Standard Pressure Gauge - Item #80082.02

valve stem in order to get a pressure reading. It's preset to work on Leafield and Halkey-Roberts valves. For other valves screw the depressor in or out. * For Leafield and military valves, remove the included adapter. Add the adapter for use with Summit, Halkey-Roberts, Innova and similar valves.



Leafield A6 Pressure Relief Valve Cap - Item #38534.01

Use this cap to plug your Leafield PR valve in emergency cases. If the PR valve fails and allows your floor to deflate too much, temporarily plug it with this cap.



C7 Leafield Valve Adapter - Item #38523.01

…quick twist seals the Leafield C7 Valve Adapter to your boat's Leafield C7 Valve for easy solo inflation with zero leakage. * This adapter is especially helpful with high-pressure drop-stitch inflatables. * The threaded male end screws into your Leafield C7 Valve, sealing the O-ring for an airtight,…



B7 Leafield Valve Wrench - Item #38527.01

Specifically designed for B7 Leafield Valves and Leafield Pressure Relief Valves.


Halkey-Robert Pressure Relief Valve - Item #38506.01

Halkey-Roberts Pressure Relief Valve for self-bailing raft floors. Releases air at 2.5 psi.



Leafield A6 Pressure Relief Valve Screen - Item #38533.01

This is a replacement screen for the one that comes in the Leafield A6 Pressure Relief Valve.


K-Pump Pressure Gauge for Boston Valves - Item #80069.01

Protect your inflatable boats and toys with the K-Pump Pressure Gauge for Boston Valves. Works great on most of these common valves found in float tubes, belly boats and many pontoon-type water crafts. * This easy-to-use mechanical air pressure gauge lets you accurately measure the psi in your…



NRS Pressure Gauge Adapter for Leafield Valves - Item #80009.01

The NRS Pressure Gauge Valve Adapter attaches to both the NRS Mechanical Pressure Gauge and Digital Pressure Gauge. It fits snugly in all Leafield valves and military valves. * This handy adapter makes accurately checking your boat's air pressure easier than ever.



NRS Mechanical Pressure Gauge - Item #80007.02

pressure readings while you pump. * Gauge tip fits Leafield and military valves. To use with other valves, such as Halkey-Roberts and Summit, add the K-Pump Kwik Check Gauge Adapter Tip, Item # 80084.01. * Screw in gauge tip adjusts for best valve plunger depression. * Gauge tip must be in the valve



NRS Digital Pressure Gauge - Item #80008.02

Pressure Gauge helps you keep the air pressure in your inflatable raft, cataraft, kayak, SUP or body board exactly where you want it. * Proper air pressure gives your inflatable its best performance and protects it from damage caused by over-inflation. * Fits all Leafield and military valves. *…


Halkey-Roberts PR Valve Boot - Item #38508.01

Boot for Halkey-Roberts Pressure Relief Valve.


View: Grid | List
Showing 1 - 12 of 95