Stainless steel U-bolt for use with LoPro™ Fitting creates a connection that will hold firmly for a lifetime of boating. Includes 2 zinc-coated steel nylon-insert lock nuts and flat washers. OversizedU-bolts are recommended for Passenger Seat Mounts, Aluminum Cataraft Floors, the Cataraft Anchor…
Quantity:
…extra passengers safely and easily by adding a comfy padded raft seat to any NRS frame. Attaches to a cross bar or side rail with the included oversizedU-bolts. Seat not included. See item #1239 for the Angler Fishing Seat Mount. When attaching the mount, please bolt it to the frame before attaching the…
Quantity:
…-T6 anodized aluminum pipe, with 1/8" wall thickness. LoPro Fittings come with U-bolts, lock nuts and washers. Cross bar lengths are the center-to-center measurements between the frame side rails. Some Items are Oversized and incur a Shippers Surcharge
Quantity:
The standard seat bar gives you a bird's eye view. Comes with LoPro fittings, u-bolts, washer and nuts. The aluminum seat plate is welded to the frame pipe for structural integrity. Widths: 48" - 82" Some Items are Oversized and incur a Shippers Surcharge
Quantity:
…bird's eye view. Includes LoPro™ fitting, u-bolts, washers and nuts. The hole patterns on the plate can be used with an angler/swivel seat or regular low or high back raft seat. This bar is not for whitewater use. Widths: 48" - 82" All Items are Oversized and incur a Shippers Surcharge
Quantity:
…-to-weight ratio.. Outside diameter = 1 5/8" Inside diameter = 1 3/8" Wall thickness = 1/8"" Cast aluminum LoPro fittings Stainless steel "coined" U-bolts Please note: NRS Cataraft Yokes place the center of the lower side rails 10" below the center of the top side rail. Generally they work best on NRS…
Quantity:
…Spreader Bar prevents that bowing and helps keep the floor "trampoline tight". The Spreader Bar attaches to the lower side rails with included NRS OversizeU-bolts (please see the alternate image).
Quantity:
…exposed to water and sun. We back the transom plate with two pieces of aluminum channel to increase the grip on the L-shaped pipe sections. Four oversizeU-bolts hold the transom plate firmly in place. If you already have an NRS Stern Seat Mount, you can install your Motor Mount by removing the Seat Bar…
Quantity: