Products (17)

Motor

1 - 12 of 17

NRS Raft Motor Mount - Item #1235

Attach an outboard motor to the NRS Raft Motor Mount and your raft is ready for fishing or moving you through those long, flat stretches. We use our heavy-duty 1-5/8" OD 6061-T6 aluminum pipe to make the framework for the Motor Mount. The 18" wide transom plate is a piece of 2 x 8 wood/plastic composite…

Quantity:

Related Searches: Motor Mount | Seat Back | Transom | Nrs Fishing Raft Frame

NRS Motor Mount Stern Side Rails - Item #1200 SR

Convert your oar-powered raft to a motor boat by using a pair of NRS Stern Side Rails to connect our Motor Mount to your raft frame. Great for fishing or those slow, flatwater stretches. Made with our standard NRS Frame Pipe, 1-5/8" OD 6061-T6 aluminum pipe, complete with LoPro Fittings (including U…

Quantity:

Related Searches: Motor Mount | Transom | Lopro Frame Fittings | Stern Side Rails

NRS 18' Kodiak Cataraft - Item #1119

Run it down the Grand Canyon. Motor it up the Amazon. Put a moose on it and row it through Alaska. Build a shack on it and drift the Mississippi. The 18' NRS Kodiak Cataraft is as big as your plans. NRS "cats" are designed for extraordinary performance, agility and stability, whether transporting passengers…

Quantity:

Related Searches: Pontoon Boats | Catamaran | Drift Boat | Cataraft Fishing

NRS Cataraft Motor Mount - Item #1235 C

…outboard motor-powered boat with the NRS Cataraft Motor Mount. Great for fishing or motoring through the slow, flat stretches. The heavy-duty 1/4" thick aluminum plate is bent to fit over the horizontal bars of an NRS Cataraft Yoke. The mounting surface is 12" wide. The clamping screws on your motor press…

Quantity:

Related Searches: Motor Mount | Cataraft Fishing | Used Catarafts | Nrs Motor Mount

NRS GigBob Accessory Mounting Plate - Item #16437

…attach. An aluminum support arm pivots down and attaches to the rear D-ring on the GigBob giving you the added stability you need to use and anchor or motor. The plate is predrilled to accommodate the Scotty Anchor Mount.

Quantity:

Related Searches: Gigbob | Anchor Mount | Scotty | Motor Mount

NRS Gusto Replacement Motor - Item #1725.4

Replacement motor for the NRS Gusto pump.

Quantity:

Related Searches: Electric Pumps

LVM Switch Lever - Item #1707.5

The plastic trigger that engages the LVM motor also know as the "on/off" switch.

Quantity:

LVM Housing Screw - Item #1707.71

The housing screw keeps the outer LVM cover (or housing) attached to the LVM motor.

Quantity:

LVM Copper Contact - Item #1707.6

This copper contact is soldered to the motor. This is the true "on/off" switch. The plastic trigger pushes on to this part. The copper contact can become de-soldered if the LVM overheats; effectively shutting the unit down. This is a type of overload device for the LVM. These are sold individually.

Quantity:

LVM Drive Pulley - Item #1707.81

The drive pulley is the device that mates the motor shaft to the bottom assembly. Note: New bottom assemblies come equipped with a drive pulley pre-installed.

Quantity:

Related Searches: Pulleys

LVM Inflator Pump - Item #1707

…around the raft to reach the interior valves. 12-volt motor is fast and powerful: 1.75 PSI in 5 minutes per raft. The temperature-sensitive relief valve protects against overheating. 4 nozzles, 10' battery-clamp cord. Never operate LVM with vehicle motor running - can overheat pump due to a higher volt output…

Quantity:

Related Searches: Raft Pump | Air Pump | Electric Pumps | Inflator

Big Blower Pump - Item #1721

If you have multiple rafts or travel with your raft on a trailer, this commercial-quality pump will come in handy. Strong 120-volt motor for quick inflation. Inflates to 1.75 PSI. Features a handy thumb on/off switch and a 30' cord.

Quantity:

Related Searches: Raft Pump | Pump | Electric Pumps

Page 1 2 of 2 | Next

Site Search by