…readings while you pump. * Gauge tip fits Leafield and military valves. To use with other valves, such as Halkey-Roberts and Summit, add the K-Pump Kwik Check Gauge Adapter Tip, Item # 80084.01. * Screw in gauge tip adjusts for best valve plunger depression. * Gauge tip must be in the valve for…
…the gauge comes it works on all Leafield and military valves. * By adding the Kwik Check Adapter Tip, Item # 80084.01, you can use the gauge on Halkey-Roberts, Summit and similar valves. Extend the screw in the base of the gauge to sufficiently depress the valve stem on these valves. * Gauge reads…
…Pressure Gauge takes the guess work out of boat pressure. This lightweight, durable gauge works on many valves, so you only need to carry one gauge. * Large, high contrast display reads from 0 - 20 psi and is easy to read in all conditions. * This gauge must be in the valve while you read the gauge.…
…mechanical air pressure gauge lets you accurately measure the psi in your inflatable to ensure best performance and help prevent a blowout. * The large, high-contrast display reads from 0-15 psi. * A ribbed rubber gauge case provides great impact protection and makes the gauge easy to handle, even…
…high-pressure pump that's perfect for today's drop-stitch inflatable stand up paddle and body boards. Inflates to 20 psi with ease. * Built-in pressure gauge takes the guesswork out of inflating your boat or board. * This low-volume, two-hand pump lets you inflate to pressures up to 20 psi. * You…
The NRS Pressure Gauge Valve Adapter attaches to both the NRS Mechanical Pressure Gauge and Digital Pressure Gauge. It fits snugly in all Leafield valves and military valves. * This handy adapter makes accurately checking your boat's air pressure easier than ever.
…kayak. It's also a great pump for higher pressure inflatables. * The included pressure gauge takes the guesswork out of inflating your boat or board. Note: Photos on the box the pump comes in incorrectly show the gauge attached to the pump. * The aluminum shaft, sturdy handle and tough polypropylene…
On Sale: $29.95
…with the high-volume mode, then switch to high-pressure mode for low effort pumping. * There's no need to keep stopping to check pressure with a gauge, the K-Air is preset to stop adding air when 15 psi is achieved. * And, if you have an air compressor, or can stop at a service station on the way…
…pressure. * Inflate and deflate quickly with this powerful 12 volt pump. * It's easy to know exactly what pressure you have with the built-in 0-15 psi gauge. * 9 foot long battery cables and 6 foot air hose gives you good reach. * Eight valve adapters, including one specifically for the Leafield C7,…
Lost the Adapter Tip for your K-Pump Kwik Check Gauge? No problem, here's a replacement. * The Adapter Tip lets you use your Kwik Check Gauge for measuring pressure in inflatables with Halkey-Roberts, Summit, Innova and similar valves. * Remove the Adapter Tip when measuring pressure with Leafield…
Replacement hose for the NRS Super Pump. * Includes C7 Leafield valve adapter. * This hose fits the version of the Super Pump with the pressure gauge mounted in the top of the handle and the blue-colored pump cylinder. It does not fit in the earlier version of the Super Pump that has a gray-colored…
…on smaller cars giving you a more stable platform on which to load your gear. * Increases crossbar spread on short-roofed vehicles from a narrow 12" or 13" crossbar spread to a whopping 36". * Easy to install with no tools required. * Made with heavy gauge steel to create maximum stability.
Nrs.com will be undergoing site maintenance on June 29th, 2016 between 3:00-4:00am Pacific Standard Time. During this time the site will be unavailable.