…and highly recommend it. Mix with Clifton Accelerator for a better bond and faster cure time. Not required. Accelerator ratio: 0.8 oz. to 1 gal. glue. Coverage Guideline: 3.5 ounces should cover 1-sq. ft. of patch (both surfaces), with 3 thin coats. We use Clifton Hypalon® Adhesive to bond Hypalon®…
Quantity:
…adhesion. Mix Clifton Accelerator with CliftonHypalon Adhesive for a better bond and faster cure time. Ratio: 0.8 oz. Accelerator to 1 Gal. of Adhesive. Be sure to follow ratio instructions carefully. Too much accelerator will de-activate the glue. Clifton Accelerator can be mixed with Clifton Urethane Adhesive…
Quantity:
…/Urethane adhesive with accelerator. Can be used to bond PVC to rubber (Hypalon®, neoprene, Pennel Orca®etc). When bonding rubber to rubber, CliftonHypalon Adhesive, # 1904, is your best choice. Shelf-Life is 1 year Mix glue with accelerator at 10 parts glue to 1 part accelerator. All are Flammable…
Quantity:
Replacement Exterior Seam Tape used to reinforce Pennel Orca® Boat seams to make for a cleaner finish. We recommend CliftonHypalon Adhesive (item #1904) for adhering these strips to your boat. Role Size is 2.5" x 60"
Quantity:
Reinforce your standard or self-bailing floor with this V-Tape. Use CliftonHypalon Adhesive to apply. Color: Black 1.5" on one fold and 3.5" on opposite fold. Sold by the foot .
Quantity:
…with a new NRS Hypalon raft or IK. Repair parts are fitted in a water resistant dry box, with gasket-lined lid. This kit is intended to give you the basics to make an emergency on-the-water repair. See the parts list for the included items. Other items, such as Toluene and CliftonHypalon Accelerator…
Quantity:
…to give you the basics to make an emergency on-the-water repair. See the parts list for the included items. Other items, such as Toluene and CliftonHypalon Accelerator (sold separately), are recommended for more complete, long lasting repair jobs. If you do not have an NRS boat, some of the items,…
Quantity:
The most anti-abrasion HD40 gum produced. This material is used as the bottom chaffer on all NRS Pennel Orca® boats. Comes in 15", 18" and 22" widths and sold by the running foot.
Quantity:
The material used to make all NRS Sport and Otter Series rafts. 1100 denier / 41 oz. Prices are per running foot. Width is approximately 57 inches.
Quantity: