Our choice for unsurpassable adhesion. We use it on our Pennel Orca® boats and highly recommend it. Mix with Clifton Accelerator for a better bond and faster cure time. Not required. Accelerator ratio: 0.8 oz. to 1 gal. glue. Coverage Guideline: 3.5 ounces should cover 1-sq. ft. of patch (both surfaces…
Quantity:
Clifton Urethane Adhesive Excellent one-part adhesive for PVC and urethane. Comes with brush applicator. Coverage Guidelines: 4 ounces should cover 1 - 1.5sq. ft. of patch (both surfaces), with 2 thin coats. Shelf life: 1 year All are Flammable Items and incur a Shippers Surcharge
Quantity:
…unsurpassable adhesion. Mix Clifton Accelerator with Clifton Hypalon Adhesive for a better bond and faster cure time. Ratio: 0.8 oz. Accelerator to 1 Gal. of Adhesive. Be sure to follow ratio instructions carefully. Too much accelerator will de-activate the glue. Clifton Accelerator can be mixed with Clifton Urethane…
Quantity:
PVC/Urethane adhesive with accelerator. Can be used to bond PVC to rubber (Hypalon®, neoprene, Pennel Orca®etc). When bonding rubber to rubber, Clifton Hypalon Adhesive, #1904, is your best choice. Coverage Guidelines: 4 ounces should cover 1 - 1.5 sq. ft. of patch (both surfaces), with 2 thin coats…
Quantity:
…These can be used for strapping in gear or installing thigh straps in your boat. Use urethane specific glue for installation such as #1901 Clifton Urethane Adhesive.
Quantity:
…-reinforced PVC hinge holds D-rings. Stainless steel 1" D-rings with PVC patch material. Hinge fabric is sewn and glued to patch. Attach using Clifton Urethane Adhesive. Patch diameter: 4"
Quantity:
Replacement 37 oz. AIRE PVC Raft Material. Use Clifton Urethane Adhesive or Stabond™ to adhere to other PVC material. Sold by the running foot in a 70" wide roll.
Quantity:
Economical one part glue for Hypalon®, Pennel Orca® and neoprene. Shelf life: 1 year All are Flammable Items and incur a Shippers Surcharge
Quantity:
…more complete, long lasting repair jobs. If you do not have an NRS boat, some of the items, such as the valve parts, may not work on your boat. The adhesive is flammable. SEE NOTES All are Flammable Items and incur a Shippers Surcharge
Quantity:
…These can be used for strapping in gear or installing thigh straps in your boat. Use urethane specific glue for installation such as #1901 Clifton Urethane Adhesive.
Quantity:
The most anti-abrasion HD40 gum produced. This material is used as the bottom chaffer on all NRS Pennel Orca® boats. Comes in 15", 18" and 22" widths and sold by the running foot.
Quantity:
…intended to give you the basics to make an emergency on-the-water repair. See the parts list for the included items. Other items, such as Toluene and Clifton Hypalon Accelerator (sold separately), are recommended for more complete, long lasting repair jobs. If you do not have an NRS boat, some of the items…
Quantity: